railways hardware and fasteners, marine hardware and fasteners, data centre panels locks & software, switchgear panels & fasteners

list
grid

Add to Cart

K1022.A4800X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4800X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4800X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4800X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4800X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4800X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4750X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4750X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4750X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4750X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4750X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4750X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4700X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4700X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4700X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4700X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4700X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4700X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4650X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4650X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4650X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4650X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4650X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4650X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4600X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4600X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4600X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4600X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4600X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4600X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4550X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4550X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4550X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4550X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4550X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4550X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4500X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4500X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4500X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4500X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4500X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4500X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4450X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4450X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4450X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4450X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4450X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4450X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4400X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4400X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4400X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4400X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4400X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4400X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4350X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4350X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4350X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4350X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4350X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4350X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4300X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4300X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4300X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4300X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4300X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4300X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4250X67| Drill bushes flanged DIN 172 | Special steel | Length |62X67

AED 0

Part No: K1022.A4250X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4250X56| Drill bushes flanged DIN 172 | Special steel | Medium |62X56

AED 0

Part No: K1022.A4250X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4250X30| Drill bushes flanged DIN 172 | Special steel | Short | 62X30

AED 0

Part No: K1022.A4250X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4200X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A4200X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4200X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A4200X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4200X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A4200X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4150X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A4150X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4150X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A4150X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4150X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A4150X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4100X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A4100X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4100X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A4100X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4100X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A4100X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4050X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A4050X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4050X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A4050X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4050X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A4050X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4000X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A4000X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4000X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A4000X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A4000X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A4000X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3950X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3950X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3950X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3950X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3950X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3950X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3900X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3900X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3900X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3900X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3900X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3900X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3850X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3850X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3850X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3850X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3850X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3850X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3800X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3800X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3800X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3800X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3800X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3800X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3750X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3750X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3750X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3750X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3750X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3750X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3700X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3700X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3700X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3700X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3700X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3700X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3650X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3650X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3650X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3650X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3650X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3650X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3600X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3600X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3600X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3600X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3600X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3600X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3550X67| Drill bushes flanged DIN 172 | Special steel | Length |55X67

AED 0

Part No: K1022.A3550X67

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3550X56| Drill bushes flanged DIN 172 | Special steel | Medium |55X56

AED 0

Part No: K1022.A3550X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3550X30| Drill bushes flanged DIN 172 | Special steel | Short | 55X30

AED 0

Part No: K1022.A3550X30

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3500X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3500X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3500X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3500X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3500X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3500X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3450X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3450X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3450X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3450X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3450X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3450X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3400X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3400X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3400X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3400X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3400X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3400X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3350X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3350X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3350X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3350X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3350X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3350X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3300X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3300X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3300X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3300X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3300X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3300X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3250X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3250X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3250X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3250X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3250X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3250X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3200X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3200X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3200X45| Drill bushes flanged DIN 172 | Special steel | Medium |48X45

AED 0

Part No: K1022.A3200X45

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3200X25| Drill bushes flanged DIN 172 | Special steel | Short | 48X25

AED 0

Part No: K1022.A3200X25

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.
Add to Cart

K1022.A3150X56| Drill bushes flanged DIN 172 | Special steel | Length |48X56

AED 0

Part No: K1022.A3150X56

Available Qty: 1000

Drill bushes flanged DIN 172 Special steel. Version: Hardened and ground. Hardness 740 ±80 HV 10 Note: From diameter D1 over 15 mm size increases are 0.5 mm.

First Previous 1 2 3 4 5 6 7 Next Last